FB-220 Replacement Filter Cap Kit

Description

The FB-220 is an upgraded replacement filter capacitor block for the SB-220/SB-221/HL-2200.  This product features high-quality 2.5 amp ripple@ 100 hz, 6000 hr @ 105c automotive -grade  220 μF 450 VDC electrolytic capacitors.  The original plastic capacitor mounting frames/spacers are re-used so that the completed kit fits back into the original sub-frame and bolts back into the amplifier in the original location. Includes Premium Harbach Electronics Board, 8 new screw type terminal Electrolytic capacitors, 8 3 watt 100k bleeder/equalization resistors, 8 1n4005 Diodes,16 #10 3/8 sems screws,3 #10 bent solder lugs.

Must re use the stock plastic holder pieces. If melted at the end from bleeder resistor heat just turn them around 180 degrees, back to front.