Description

Fully assembled by me.

Must be used either with L-4b Harbach board or a bias mod must be done to eliminate the 50k resistors in the power supply.

Rf out – output coax to output directional coupler

B- from bias mod string or L-4b Board

Ct – yellow wire green stripe center tap from filament transformer

V- blue wire switched side of relay coils from soft start or rca jack or L-4b Board

V+ 24 vdc from rectifier or L-4b board

Rf in coax from input so-239

Amp in coax going to input circuits

Rf out braided lead coming off of tank output network coax

Install video https://youtu.be/lrdkjTXIQLo?si=S0aQ1bR6yjRcRAh1

May require soft key interface

Install video only no paper instructions